Advanced DSP marine radio with compact remote head
Digital Signal Processor
The digital IF filter provides flexible filter settings for narrow bandwidth signals without having to install an optional filter.
Built-in ITU Class E DSC
The IC-M802 conforms to Class E DSC requirements, vital for your safety at sea.
One touch e-mail button*
The e-mail button allows quick access to the pre-programmed e-mail frequency list.
Automatic antenna tuner, AT-140
The optional AT-140 easily connects to the radio without opening the casing. The tuner through function can be used with the AT-140.
Other features
- 4×8-inch remote controller and 4×4-inch external speaker
- Large LCD with dot matrix characters
- Channel and Group dials offer easy channel selection and operation
- Powerful 150W (PEP) output
- 0.5 to 29.9999MHz wideband receiver
- DIN and RS-232C connectors for external equipment
- NMEA 0183 interface included
- 1035 ITU, 160 programmable and 160 e-mail channels are available
| IC-M802 |
Frequency range | Tx | 1.6–2.9999 MHz
4.0–4.9999 MHz
6.0–6.9999 MHz
8.0–8.9999 MHz
12.0–13.9999 MHz
16.0–17.9999 MHz
18.0–19.9999 MHz
22.0–22.9999 MHz
25.0–27.5000 MHz |
Rx | 0.5–29.9999 MHz |
Power supply requirement | 13.6V DC ±15% (negative ground) |
Dimensions (W×H×D)
(Projections not included) | Main unit:
240×94×238.4 mm;
97/16×311/16×93/8in
Controller unit:
220×110×84.4 mm;
821/32×411/32×35/16in |
Weight (approx.) | Main unit:
4.7kg; 10.4lb,
Controller unit:
570g; 1.3lb |
Current drain (approx.) | Transmit (High) | 30A typ. at max. power |
Max. audio output | 3.0A |
Sensitivity | J3E, A1A, J2B, F1B
(at 10dB S/N; 1.8–29.999MHz) | 0.5μV |
H3E
(at 10dB S/N; 1.8–3.999MHz) | 3.2μV |
DSC (J2B)
(at 10dB S/N; 0.5 –29.999MHz) | 0.5μV (at 1% error rate) |
Selectivity | J3E, R3E, J2B, A1A | 2.4kHz/–6dB
3.6kHz/–60dB |
Audio output powe (10% dist/ 4Ω load) | 4.0W |
RF output power (PEP)
(output power differs depending on version) | 150/60/20W |