(10-inch CRT, Radome Scanner)
• Powerful 4kW output power
• Two types of scanner units are available
- MR-1000TII: 120cm open array scanner observes up to 48nm
- MR-1000RII: 60cm radome scanner observes up to 36nm
• 8-level bright picture on 10-inch monochrome green CRT
• Simplified Automatic Tracking Aid function
See overleaf for details.
• External GPS and Compass data input with NMEA0183, N+1, AUX format
• English and Korean indication
• North-up, Course-up, Head-up & True-motion
Bearing, speed and position data required. Depends on display mode.
OTHER FEATURES
- The MR-1000RII/TII provides many useful features : 2 EBL’s, 2 VRM’s, SEA clutter, RAIN clutter, Off center, Interference reduction, Echo stretch, Zoom, Trail, long pulse and automatic calibration function.
- When connected to the GPS and/or compass, the MR-1000RII/TII displays the following information: Course-up, North-up, True motion indication, own and other vessel’s speed, position and course, waypoint and man overboard point.
- Simplified Automatic Tracking Aid allows you to plot up to 10 targets and the radar automatically traces the targets.
- The CPA (Closest Point Approach) and TCPA (Time to CPA) alarm gives an audible warning when the tracking targets come within the set range or time.
- Power saver function pauses the scanning for a preset time and conserves battery consumption. When used with the zone alarm function, the CRT display is turned off until an object enters the programmed alarm zone.
SPECIFICATIONS
GENERAL |
Minimum range | : 25m (when measurement range is 1⁄8NM) |
Maximum range | : MR-1000RII 36NM MR-1000TII 48NM |
Measurement range(NM) | : 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48* * MR-1000TII only |
Preheat time | : 90sec. |
|
DISPLAY UNIT |
Display type | : 10″ monochrome CRT |
Resolution | : 640 × 480 dots |
Power supply requirement | : 10.2–42V DC (negative ground) |
Power consumption (approx.) | : MR-1000RII 60W (approx.) MR-1000TII 70W (approx.) |
Operatable temp. range | : –15°C to +55°C |
Unit of distance | : NM (nautical mile), km |
Dimensions (proj. not incl.) | : 269(W) × 264(H) × 258(D) mm |
Weight (approx.) | : 6.5kg |
Input data format | : NMEA 0183, N+1, AUX |
|
SCANNER UNIT |
Model Name | |
Type | : 60cm slotted waveguide array in radome | : 120cm slotted waveguide array |
|
Rotation speed | : 24/36/48rpm typ. | : 24/36/48rpm typ. |
|
Beamwidth Horizontal beam Vertical beam | : 4° typ. 22° typ. | : 2° typ. 25° typ. |
|
Sidelobe | |
Polarization | |
Dimensions (projections not included) | : 607(Ø) × 243(H)mm | : 1205(d) × 381(H) mm |
|
Weight (approx.) | |
Operating temperature range | : –25°C to +70°C | : –25°C to +70°C |
|
Frequency | : 9410MHz ±30MHz | : 9410MHz ±30MHz |
|
Peak output power | |
Pulse-width/Reception rate | : 80nsec./2880Hz, 80nsec./2160Hz, 250nsec./2160Hz,350nsec./2160Hz, 900nsec./720Hz | : 80nsec./2880Hz, 80nsec./2160Hz, 250nsec./2160Hz,350nsec./2160Hz, 900nsec./720Hz |
|
Modulator | : FET switching | : FET switching |
|
Mixer and local oscillator | : Microwave integrated circuit | : Microwave integrated circuit |
|
Intermediate frequency | |
IF passband width | : 10MHz, 3MHz | : 10MHz, 3MHz |
|
Tuning | : Auto or manual | : Auto or manual |
|
System cable | : 15m (49.2ft); OPC-1188 | : 20m (65.6ft) |
|
|
All stated specifications are subject to change without notice or obligation.
OPTIONS
- OPC-1077SYSTEM CABLE
Allows you 20m (65.6ft) separate installation between the display unit and the scanner unit.
- OPC-1078SYSTEM CABLE
Allows you 30m (98.4ft) separate installation between the display unit and the scanner unit.