Simplified operation
The IC-M700PRO is easy to use whether you are new to SSB or an expert. Channel selection is quick and easy to access with large, independent GROUP and CHANNEL knobs. Each panel button has only 1 function. The large, easy to read display shows channel (or frequency) and operating status at a glance. A new green LCD is easy to see in sunlight, but not too bright for night operations.
Powerful output extends your communications reach
The powerful 150 W*(PEP) transmitter provides long distance communication you can rely on. To make sure that power is always available to you—even during demanding RTTY (radio teletype) or E-mail operation—a large cooling fan combined with the ICM700PROs aluminum chassis keep the radio cool.
* 60 W (PEP) above the 24 MHz bands.
Scanning functions
Locate desired signals quickly with a powerful memory scan feature.
Additional Features
- Automatic antenna tuner, the AT-140, is available to match the transceiver to your antenna
- Numerous operating modes*available: USB, AM, CW, FSK and AFSK
*Ask your dealer for details. - Wide band, general coverage receive — 0.5 to 29.9999 MHz
- Channel/frequency knob allows the user to tune specific frequencies around the memory channel
- NMEA plus 2 DIN connectors are available for external equipment connection, such as a linear amplifier, FSK terminal, E-mail modem, etc.
- Optional 2-tone alarm function (UT-95 2-TONE ALARM UNIT required) provides simple transmission of emergency signals
- NMEA0813 interface included
| General |
|---|
Frequency coverage Rx Tx | 0.5 - 29.9999 MHz 1.6 - 2.9999 MHz 4.0 - 4.9999 MHz 6.0 - 6.9999 MHz 8.0 - 8.9999 MHz 12.0 - 13.9999 MHz 16.0 - 17.9999 MHz 18.0 - 19.9999 MHz 22.0 - 22.9999 MHz 25.- 27.5000 MHz |
| Mode | USB, AM, CW, FSK and AFSK |
| Number of channels | 150 (max.; 3 groups of 50 channels each) |
| Antenna impedance | SO-239 (50Ω) |
| Power supply requirement | 13.6 V DC ±15% |
Current drain (at 13.6 V DC) | | Tx | max. power | 30 A typ | | Rx | max. audio output | 2.5 A |
|
Operating temperature Guaranteed range | -30°C to +60°C -22°F to +140°F -20°C to +60°C -4°F to +140°F) |
| Frequency stability | ±10 Hz (0.5-14.9999 MHz) ±20 Hz (15-29.9999 MHz) |
Dimensions (projections not included) | 291.4(W) × 116.4(H) × 315(D) mm 1115/32(W) × 419/32(H) × 1213/32(D) in |
| Weight | 7.9 kg; 17 lb 7 oz |
| Remote connector | NMEA D-sub 9-pin (female) |
| ACC 1 connector | DIN 8-pin (female) |
| ACC 2 connector | DIN 7-pin (female) |
| Transmitter |
|---|
| Output power | 150 W PEP (below 24 MHz) 60 W PEP (above 24 MHz) |
| Spurious emissions | -75 dB typical |
| Unwanted sideband | 70 dB typical |
| Carrier suppression | 65 dB typ. |
| Microphone impedance | 8-pin connector (600 Ω) |
| Receiver |
|---|
Sensitivity USB, CW, FSK, AFSK (for 12 dB SINAD) AM *AM (for 10dB S/N) | 6.3µV (0.5-1.5999 MHz) 1 µV (1.6-1.7999 MHz) 0.35 µV typical( 1.8-29.9999 MHz) 32 µV (0.5-1.5999 MHz) 6.3 µV (1.6-1.7999 MHz) 2.2 µV typical (1.8-29.9999 MHz) |
| Spurious response rejection ratio | 80dB typ. (1.6 - 29.9999MHz) |
Audio output power (at 13.8 V DC) | 5 W typ. at 10% distortion with a 4 Ω load |
| Clarity variable range | ±150Hz |
| External speaker jack | 2-conductor 6.5 (d) mm (1⁄4″)/4-8 Ω |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone
- DC power cable
- ACC plugs
- Mounting bracket kits
- Microphone hanger
- Speaker plug
- Spare fuses