Affordable, high performance radio that offers abundant features
Simple operation for instant communication
The IC-F3003 series is so easy to use theres no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
* Typical with internal speaker
Longer operating time
A new high efficiency FET of the IC-F3003 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time.
*Tx:Rx:Standby=5:5:90. Power save function ON.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental test. In short, the IC-F3003 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
Other features
- DTMF autodial
- CTCSS/DTCS encoder/decoder
- BIIS PTT ID transmission
- MDC PTT ID and emergency
- Low battery alert
- 2-step power save
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Enhanced emergency
- 3-color LED
- Surveillance function
General
IC-F3003 |
IC-F4003 |
|||
Frequency range |
136MHz–174MHz |
350MHz–400MHz |
||
Number of memory channels |
16 channels |
|||
Channel spacing |
12.5kHz/25kHz |
|||
Type of emission |
16K0F3E/11K0F3E |
|||
Current drain |
Tx |
1.3A |
||
Rx |
Stand-by |
75mA |
70mA |
|
Max. audio |
330mA (Internal SP) |
|||
Dimensions (W×H×D) |
58×111×31 mm (With BP-264) |
|||
Weight |
330g (With BP-264) |
Transmitter
IC-F3003 |
IC-F4003 |
|
RF output power (at 7.2V DC)) |
5W, 2W, 1W |
4W, 2W, 1W |
Spurious emissions |
70dB (min.) |
|
Frequency stability |
±2.5ppm |
|
Audio harmonic distortion (W/N) |
1.0%/1.5% (typ.) |
|
FM Hum and Noise (W/N) |
46dB/40dB (typ.) |
Receiver
IC-F3003 |
IC-F4003 |
||
Sensitivity at 12dB SINAD |
0.25dBμV (typ.) |
||
Adjacent channel selectivity (W/M/N) |
78dB/70dB (typ.) |
73dB/65dB (typ.) |
|
Spurious response rejection |
70dB (min.) |
||
Intermodulation rejection |
75dB (typ.) |
74dB (typ.) |
|
AF output power |
Internal SP |
800mW (typ.) |
|
External SP |
400mW (typ.) |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 F Method, Proc. |
Low Pressure Storage |
500.4 I |
Low Pressure Operation |
500.4 II |
High Temperature Storage |
501.4 I |
High Temperature Operation |
501.4 II |
Low Temperature Storage |
502.4 I |
Low Temperature Operation |
502.4 II |
Temperature Shock |
503.4 I |
Solar Radiation |
505.4 I |
Rain Blowing |
506.4 I |
Rain Drip |
506.4 III |
Humidity Induced |
507.4 |
Salt Fog |
509.4 |
Dust Blowing |
510.4 I |
Vibration |
514.5 I |
Shock Functional |
516.5 I |
Shock Transit Drop |
516.5 IV |
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
Dust & Water |
IP54 (Dust-protection and water resistant) |
Đánh giá
Chưa có đánh giá nào.